API release trackers

The CAMARA release process uses API release trackers to provide visibility on the status of API versions.

For each public API version planned to be released as part of a meta-release, the API Sub Project shall create an API release tracker. The tracker is used for the planning and shows the progress of the API version throughout its development and release process.

In addition, for public API versions that are under development but not yet planned as part of the meta-release, it is highly recommended to create API release trackers as well, so that wide visibility can be provided on those APIs (separately from the meta-release). In this case, the API release trackerโ€™s label shall be changed from โ€œcamara-springxx/fallxxโ€ to โ€œcamara-otherโ€.

The following sections provide the details on how to support the release process.

API release tracking (umbrella page)

The API release tracking page is the place where an API Sub Project documents the releases of all its API version(s). Note: this page has "tracking" (not "tracker") in its title and there is only one such page per API Sub Project, while an API release tracker is dedicated to one specific API version.

  • A Sub Project's API release tracking page is located under the home page of the API Sub Project. It is automatically created with the API Sub Project on the wiki.

  • All API release trackers are located under the release tracking page of the API Sub Project.ย 

Note: If the umbrella release tracking page is missing, either contact the CAMARA Confluence support team, or you can create it manually as follows:ย 

  • Go to the following page <API Sub Project name> API Release Tracking, and create a copy indicating your API Sub Project home page as the target parent page.ย 

  • Replace the <API Sub Project name> in the copied page title with the actual API Sub Project name.

Create an API release tracker

For each API, when a public version is planned, a dedicated API release tracker is created to plan and track the progress through the release process. This can be done starting at M0.

To create an API release tracker, go to your API Sub project's release tracking page (see above) and do the following:

  • Push the "Add API release tracker" button to create the tracker page for the new API version to be released.

  • In the page title, put the <API name> and a "v" followed by the <Target version> as described in the below table, e.g. geofencing v1.0.0

  • Complete the table on the page following the indications in the table below. PLEASE DO NOT CHANGE THE FIRST COLUMN.

  • If planned for meta-release, add the meta-release label to the page (e.g. camara-fall24)

  • Maintain the page up-to-date to reflect the progress of the API version through the release process, e.g. at its various alpha, release-candidate and public version.

The API Sub Project can add any additional information about the API version on its release tracker. as they see useful.

NOTE: The API release tracker is a normal confluence page (created from a template), and can be edited as such.

API release tracker content explanation

Each API release tracker has the below table that serves as the source for tracking progress of the release of the API version.

In particular, this content is pulled into the meta-release planning page (based on the page meta-release label).

IMPORTANT

THE LEFT COLUMN OF THIS TABLE SHALL NOT BE CHANGED. If you want to add a new field, please contact the release management team through the mailing list to request the addition of the field and the reason to add it. Adding a field will require a manual update to ALL release trackers.

Explanations:

Meta-release

The name of the meta-release, e.g. Springxx or Fallxx. Put N/A if the API version is planned to be an initial public version only outside of the meta-release.

API name

The API name. For the definition of "API name" on this page see: API Release Process, e.g. geofencing

Target version

The API version that you plan to publish in the meta-release, e.g. 0.5.0, 1.0.0, 1.1.0, etc. Note: patch versions of a released API areย handled on the same release tracker as the released API.

Repository

The short link to GitHub repository for the API, e.g.ย DeviceLocationย 

Group

The name of the API Sandbox or Sub project under which the repository of the API is managed, e.g. DeviceLocationย 

Maturity

Indicates the maturity of the public API version that is targeted in the upcoming meta-release: choose one of "initial" or "stable".

Scope

The shortened link to a GitHub issue called "Scope for API-name version <x.y.z>" which needs to be created latest at M1 and resolved by M3 e.g.ย DeviceLocation/issues/58

API version

The version of the latest (pre-)release (alpha, release-candidate or public release) API version.ย This field is to be updated with each (pre-)release date, e.g. 0.2.0-alpha.3, 0.10.0-rc.2, 0.10.1, 1.0.0-rc.5, etc.)

M3 date

This is the actual date of the M3 pre-release of the API version. Update of this field is mandatory with the final M3 pre-release creation date. Format is yyyy-mm-dd.

Pre-release

The short link to the release tag, updated with each alpha and release-candidate pre-release.

M4 date

This is the actual date of the M4 public-release of the API version. Update of this field is mandatory with the final M4 public-release creation date. Format is yyyy-mm-dd.

Public release

The short link to the release tag, updated with the M4 public release and with every public maintenance release.

Patch date

The date of the availability of a maintenance release (after M4). Format is yyyy-mm-dd.

RM reviews

Review status and short link to the review issue for the M3 and M4 milestone release PR reviews: e.g.ย 

M4: OKย ReleaseManagement/issues/88

M3: OKย ReleaseManagement/issues/73

Any other reviews or relevant info.

Comments

Comments on the API e.g. Previous API version(s) implemented by China Unicom, China Telecom, Vivo (Brazil), Deutsche Telekom (Germany), T-Mobile US, Telefonica (Spain). GSMA certified implementations by China Unicom. ย (source:ย https://www.open-gateway.com/operators-mapย as of 2024-08-16)ย 

Contacts

Contact names for the API release: name1 @name2

ย 

NOTE: For Confluence administrators only: the content for the Confluence template is here:ย Use by RM admins only: Content for API release tracker template (v5 - 19/09/2024).

ย 

ย